The QLDJ air jet mill micronizer from Jiangsu Hongda Powder Equipment Co., Ltd. produces powder from 2 to 150μm, depending on the model and the material. It combines multi-nozzle technology, fluidized bed grinding and horizontal air classification in one system.
This guide is written for importers, plant managers, engineers and procurement teams. It explains how the machine works, where it is used, what the three QLDJ models offer, and what to prepare before you ask for a quotation.
QLDJ Air Jet Mill for Ultra-Fine Powder Production
The QLDJ series is a fine powder grinding machine built for ultra-fine powder processing. It suits buyers who need tight control over particle size and cannot accept contamination from grinding media.
Ultra-fine grinding is not only about making powder smaller. Many industries need powder that flows, disperses and reacts in a predictable way. A wide particle range causes problems in later steps, such as uneven coating, poor blending or unstable chemical reactions. The QLDJ air classifier mill addresses this by grinding and classifying in one continuous process.
Key data for the QLDJ series:
• Product size: 2-150μm across the QLDJ-300, QLDJ-400 and QLDJ-630 models
• Feeding size: 100 mesh for all three models
• Capacity: 30-1000 kg/h, depending on the model and material
• Grinding pressure: 0.65-0.95 MPa
Actual output depends on material hardness, feed fineness and the target particle size.
Fluidized Bed Jet Mill with Horizontal Air Classification
The QLDJ is a fluidized bed jet mill. Compressed air enters the grinding chamber through specially designed nozzles and lifts the material into a fluidized gas-solid mixture. Particles then collide at high speed and break apart. Because the impact comes from particle-on-particle contact, equipment wear stays low.How the jet milling machine works
The system has five main parts:1. Air supply system: delivers clean compressed air at controlled pressure and flow.
2. Feeding system: moves raw material into the grinding chamber.
3. Grinding chamber: nozzles create supersonic airflow, and particle collisions reduce the material to micron size.
4. Classification system: the horizontal classifier separates fine particles from coarse particles.
5. Powder collection system: collects the qualified powder.
Coarse particles stay in the chamber for further grinding. Only powder that meets the target size passes through the classifier. This closed loop gives a more stable product than a mill without classification.
Air Classifier Mill with Multi-Nozzle Technology
Multi-nozzle technology spreads the grinding energy across several air jets instead of one. This helps create an even grinding zone inside the chamber.The integrated classifier wheel is the control point. A faster wheel releases finer powder, and a slower wheel releases coarser powder. The specification table later in this article shows the classifier power and speed of each model.
Buyers often ask how an air classifier mill differs from a basic jet mill. A basic jet mill grinds with limited control over the final size. An air classifier mill adds a classifier, so you can adjust fineness through the wheel speed and keep the size range narrow.
Jet Milling Machine for Micron Powder, 30-1000 kg/h Capacity
Capacity depends on the model. The QLDJ-300 handles 30-250 kg/h, the QLDJ-400 handles 100-500 kg/h, and the QLDJ-630 handles 200-1000 kg/h.Choose by your daily production target, not only by the highest number. A finer target size lowers throughput, and so does a harder material. If you are not sure which model fits, send us your material and target size, and our team can suggest a suitable model.
For coarser or less demanding work, a mechanical mill such as a pin mill may be more economical. A jet milling machine makes more sense when you need very fine powder, a narrow size range or zero media contamination.
Narrow Particle Size Distribution and Uniform Powder Quality
Particle size distribution (PSD) describes how wide the size range is in your powder. A narrow PSD means most particles sit close to your target size. This improves flow, dispersion and batch-to-batch consistency.
The QLDJ air jet mill achieves a narrow distribution because the classifier holds back oversize particles until they are ground finer. Buyers in pharmaceuticals, electronics and specialty chemicals often write their requirement as D50 or D97 values. Share these numbers with us so we can confirm that the target is realistic for your material.
A narrow PSD helps in several ways:
• Better dispersion in coatings, pigments and plastics
• More even blending in formulations
• More predictable behavior in catalysts and chemical powders
Contamination-Free Grinding Without Grinding Media
Ball mills and other media mills wear down over time, and worn material can end up in your powder. An air jet mill uses no grinding media. Particles grind against each other, so the powder stays pure.This matters for high-purity products, such as semiconductor materials, polymer materials and pharmaceutical ingredients. Air quality matters too. The compressed air that feeds the mill should be clean, and sensitive products may also need dry air.
If your process needs an extra check on oversize particles before packing, you can add a vibrating screening machine after the mill. Hongda supplies both milling and screening equipment, so you can plan the line with one supplier.
Adjustable Particle Size and Morphology for Custom Fineness
Different customers need different fineness. The QLDJ lets operators adjust the particle size mainly through the classifier wheel speed. Feed rate and air pressure also affect the result. The particle shape can be adjusted as well, which matters for powders used in electronics, coatings and advanced materials.To help us recommend the right setup, prepare these details:
• Target particle size, ideally as D50 or D97
• Particle shape requirements, if any
• Material moisture and bulk density
• Whether you need one fineness or several
Low Energy Consumption, Minimal Wear and Fully Enclosed Design
The QLDJ is designed for high impact velocity, efficient crushing, low energy consumption and minimal equipment wear. Grinding happens through particle collisions, so maintenance stays simple.The fully enclosed design keeps powder inside the system. This reduces dust in the workshop and lowers the risk of cross-contamination. It also supports stable, easy operation.
Be realistic about energy use. An air jet mill needs a compressed air source, and the air supply is a major part of operating cost. Total system power for the QLDJ-300, QLDJ-400 and QLDJ-630 is 90-110 kW, 160-180 kW and 300-360 kW. When you compare suppliers, ask exactly which equipment the total power figure covers.
Air Jet Mill for Pharmaceutical, Chemical and Cosmetic Powders
These industries share one need: fine, clean and consistent powder. The air jet mill micronizer fits this need because the product never touches grinding media.• Pharmaceutical: fine powders where purity and particle size control matter
• Chemical: fine chemical powders and specialty powders
• Cosmetics: powders that need a uniform, smooth quality
Buyers in regulated industries should state their material-contact and documentation requirements when they ask for a quotation.
Micronizer for Magnetic, Semiconductor and Catalyst Materials
High-value powders are often sensitive to contamination. A single foreign particle can change magnetic performance, electrical behavior or catalyst activity. Because the QLDJ grinds without media, it suits these materials.The machine is especially suitable for polymer materials, magnetic materials, semiconductor materials, catalysts and fine chemical powders that require ultra-fine particle sizes. Tell us the purity level you need, and we will discuss suitable options for the contact parts.
Grinding Heat-Sensitive, High-Hardness and Hard-to-Grind Materials
Heat is a problem for many materials. Compressed air expands as it leaves the nozzles, which helps limit heat build-up in the grinding zone. This makes air jet milling a good option for heat-sensitive powders.
Hard materials are another strong point. Mechanical mills wear quickly on hard feed, while jet milling relies on particle collisions rather than cutting tools.
Not every material suits jet milling. Very sticky, oily or high-moisture materials can build up in the chamber. If your material is difficult, discuss it with our team before you order.
Jet Mill for Coatings, Pigments, Plastics and Food Powders
The same machine serves many industries:• Coatings and pigments: fine, evenly sized powder for better color and dispersion
• Plastics: fine polymer powders for further processing
• Food: fine powders where media contamination is not acceptable
• Metallurgy, mining and energy: fine powders for specialty applications
If your target size is coarser, or if you grind softer materials such as herbs, spices or sugar, a standard fine powder grinding machine may be a better fit. We can compare both options for your project.
QLDJ-300, QLDJ-400 and QLDJ-630 Air Jet Mill Models and Specifications
The table below compares the three standard models. All models use a 100 mesh feeding size and a grinding pressure of 0.65-0.95 MPa.| Model | Product size | Capacity | Air flow | Classifier wheel power | Classifier wheel speed | Total system power |
| QLDJ-300 | 2-100μm | 30-250 kg/h | 10-13 m³/min | 4 kW | 8000 r/min | 90-110 kW |
| QLDJ-400 | 5-120μm | 100-500 kg/h | 20-25 m³/min | 7.5 kW | 6000 r/min | 160-180 kW |
| QLDJ-630 | 6-150μm | 200-1000 kg/h | 40-50 m³/min | 11 kW | 4000 r/min | 300-360 kW |
How to choose a model
• QLDJ-300: suits pilot production, high-value materials and smaller batches (30-250 kg/h)• QLDJ-400: suits medium production lines (100-500 kg/h)
• QLDJ-630: suits larger production volumes (200-1000 kg/h)
Always match the model to your material and target size, not to the headline capacity alone.
Air Jet Mill Price, Customization and Fast Delivery from Hongda
Air jet mill price depends on the project, so a single fixed price is rarely accurate. These factors affect the quotation:• Model size and capacity
• Material of the contact parts, based on your product requirements
• Compressed air and dust collection configuration
• Control system and electrical standard
• Spare parts, packing and shipping terms
Hongda can discuss customized configurations for your material and process. To receive an accurate quotation, send us:
• Material name and properties, such as hardness, moisture and heat sensitivity
• Feed size and target particle size (D50 or D97)
• Required capacity in kg/h
• Compressed air supply available at your site
• Local voltage and frequency
• Destination country
Our website lists fast delivery, quality assurance and 24/7 customer service as core commitments. Please confirm lead time, packing and shipping terms in writing before you place an order. You can contact us with your requirements at any time.
Air Jet Mill Manufacturer and Supplier for Global Buyers
Jiangsu Hongda Powder Equipment Co., Ltd. manufactures powder processing equipment, including crushing, grinding, screening, conveying, mixing, granulating and drying machines. This range lets buyers build a complete powder line, not just buy one machine.When you choose an air jet mill supplier, check these points:
• Written technical data: capacity, air consumption, total power and contact-part materials
• Test or sample discussion: ask how your material will be evaluated
• Clear quotation: know exactly what is included and what is not
• Documentation: manuals, drawings and clear English communication
• After-sales support: spare parts, installation guidance and technical help
• Export details: packing method, shipping terms and delivery time
Tell us your local voltage, frequency and safety requirements early. This helps us match the electrical configuration to your plant and avoids delays later.
Air Jet Mill FAQ
1. What is an air jet mill used for?
An air jet mill produces fine and ultra-fine powder. It is used in pharmaceutical, chemical, electronics, coatings, pigment, plastics, food and cosmetic industries, and for materials such as catalysts, magnetic powders and semiconductor materials.2. How is an air jet mill micronizer different from a ball mill or pin mill?
A ball mill or pin mill grinds with moving parts or media that wear over time. An air jet mill micronizer grinds with particle collisions in high-speed airflow, so the powder stays cleaner and the particle size range is narrower.3. What particle size can the QLDJ air jet mill produce?
The QLDJ series produces powder from 2 to 150μm. The QLDJ-300 covers 2-100μm, the QLDJ-400 covers 5-120μm, and the QLDJ-630 covers 6-150μm. The final result depends on the material.4. Does the machine need a compressed air system?
Yes. The mill needs clean compressed air at 0.65-0.95 MPa. The air flow requirement is 10-13 m³/min for the QLDJ-300, 20-25 m³/min for the QLDJ-400 and 40-50 m³/min for the QLDJ-630.5. Can it grind heat-sensitive or very hard materials?
Yes, in most cases. The design suits heat-sensitive, high-hardness and difficult-to-grind materials. Sticky, oily or high-moisture materials need a discussion first, so please share your material details.6. How do I get a quotation?
Send your material, feed size, target particle size, required capacity and destination country. Our team will recommend a model and prepare a quotation. You can also ask about sample testing and customization at the same time.Conclusion
A well-chosen air jet mill gives you fine, clean and consistent powder without grinding media. The QLDJ series covers 2-150μm and 30-1000 kg/h across three models, with multi-nozzle technology, fluidized bed grinding and horizontal air classification built in.Before you buy, define your material, target particle size and capacity, and confirm your compressed air supply. These four points decide which model fits and what the project will cost.
If you are comparing suppliers, we are ready to help. Please contact us for product details, a quotation, customization options, sample discussion or technical support. Send your material and target size, and our team will reply with a suitable air jet mill micronizer proposal.